whipple 502
 

so first off i want to thank everyone on OSO for all your help with my project. So i finally got my boat running and it runs good but now i need some help. Ok so i have a 30' conquest enforcer with a 502 mark 5(fresh rebuild) and i just put the sidemount whipple on. Edelbrock aluminum heads and roller cam. Bravo XR with a 2 inch lower. Just had her water tuned and runs well. I have a question about props? Im running a stock bravo1 28p. Full throttle and trimed up im running approx 5000 to 5100 rpm with 5 passengers and full gas. It pulls real hard from 4000 to 5000. My question is what RPM range should i be in with my motor setup? And could I step up to a 30p or should i lab finish my 28p. Also I want a prop to help with bow lift, any suggestion? dont know if bravo1 is bow lifting prop or not. Im proping for speed cause i dont pull any skiers. Thanks again

nobody? come on