Ignition problem - Thunderbolt 5
#1
Registered
Thread Starter
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ignition problem - Thunderbolt 5
I have 2 350 mag mpi wich has been working great, suddenly one of them started working... the fuel pumps runs fine and it cranks but it just wonīt start. When I took of plug wire from coil at distributor and held it about 1/2 inch from distributor, the engine now starts right away. What could it be... i have been changing fuel pumps but havenīt touch anything else... might have pulled som cabls..
I have changed the rotor, knock sensor... but it wonīt start
I got the MEFI 3 controller.
I got a feeling that itīs a very simple fault..
Please help!
I have changed the rotor, knock sensor... but it wonīt start
I got the MEFI 3 controller.
I got a feeling that itīs a very simple fault..
Please help!