Hydraulic steering
#1
Registered
Thread Starter
Hydraulic steering
I need advice on hyd. strg. I have a Alpha 1 drive and need full unit with 2 rams. What is the best co. to deal with if not the most reasonable. I am at a speed where I am not comfortable, especially at wot. I am close to the 80 mark. I just want to be safe.
#2
RIPSTA Racing Team
VIP Member
WTF? Please tell me what boat your pushing to 80mph with an Alpha drive and what prop and engine HP. I surprized it hasn't blown apart. There are several steering set ups in the swap shop. I'm not sure how easy it will be to find a wing plate for an Alpha, kinda not so popular high perf application. There are also several Bravo drive set ups for sale too. Including the 4 I have available in case you want to convert over. Not the classifieds, the swap forum.
#4
RIPSTA Racing Team
VIP Member
Have you checked the usual sites, Imco, Mayfair, Marine Machine? Not sure I ever seen a set up for an Alpha. Never really looked for it though. Good Luck!
#5
Registered
Thread Starter
#6
Pirate of the Chesapeake
Gold Member
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
Yes their are alpha setups... Cpperformance I think carries them, along with a few others...
FIREBOATPILOT I am running damn close to 80(gps) with a alpha, efi smallblock in a 20 stinger..
John jr
FIREBOATPILOT I am running damn close to 80(gps) with a alpha, efi smallblock in a 20 stinger..
John jr
#7
Registered
Thread Starter
Thanks. I run a Alpha SS behind a 383 on a 18 Donzi. At speed it shows I have a lot of loose skin.
#8
Pirate of the Chesapeake
Gold Member
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
John jr