internal balance?
#31
Registered
Thread Starter
Join Date: Sep 2008
Location: Lubbock, TX
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Well I was making 630hp before this happened, and would not mind going up some. may not require a dart block, but it would be nice. Ateco advertises a 540 or 555 short block for $4400 plus shipping, not a whole lot more then the $3500 I was looking at.
My rods from my 509 are still good as well as the pistons and heads, had scat h-beams and srp pistons, may look for gen v block, but all I can find here are 454 blocks for cheap.
My rods from my 509 are still good as well as the pistons and heads, had scat h-beams and srp pistons, may look for gen v block, but all I can find here are 454 blocks for cheap.
#32
Registered
Join Date: Mar 2008
Location: League City, Texas
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Look around, check racingjunk, ask the machine shops in oyur area. A buddy of mine just sold a 502 Gen VI block for cheap.
I was just trying to help.... it's totally up to you. If it were me, I'd find a good block and re-use all my stuff.
I was just trying to help.... it's totally up to you. If it were me, I'd find a good block and re-use all my stuff.