|
Originally Posted by bck
(Post 2915768)
I live about 35 miles south of Buffalo. When I was using the boat I went to all the same places and up on the river alot. I kept the boat at the small boat harbor because it was closer and had wider floating docks. Friends keep theirs at the Erie Basin because they like to party downtown.
Good Luck with the Project. Send me your email I'll email you some pictures of what I did to mount the boxes. Kevin |
I have a brand new never used stainless engine mount ignition box mount from Teague Marine. Mounts on the end of BB Chevy heads.It's heavy thick stainless plate with anodized standoffs and 3/8" allen head mounting bolts.Also has stainless bolts and nuts and has drilled and countersunk holes to mount a MSD 6M box on one side and a Soft Touch Rev Limiter on the other side.http://teaguecustommarine.com//store...199_179_83_536
Teague gets $83.50,I'll take $30 and shipping. Anyone interested PM me. http://teaguecustommarine.com//store...oducts_id=2006 |
3 Attachment(s)
I mounted my MSD #7 marine box's on a bracket, that I made, on the inner transom plate. I have run this set-up for years, with absolutely no trouble.
|
kevin, [email protected]
|
Originally Posted by RMPRam
(Post 2915808)
I mounted my MSD #7 marine box's on a bracket, that I made, on the inner transom plate. I have run this set-up for years, with absolutely no trouble.
|
| All times are GMT -5. The time now is 12:11 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.