Carb size?
#1
Registered
Thread Starter
Join Date: Jun 2008
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Carb size?
I have a 7.4L 300HP carbed motor. I'm changing the carb out, what size holley 4150 should I use and what size jets? Also changing to a air gap intake on recommendation from OSO. Thanks in advance!
#3
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
look into barry grant sea demons, had very mixed results with holley marine carbs.
In fact I would recomend calling their tech line for a size recomendation.
http://www.barrygrant.com/demon/default.aspx?page=21
In fact I would recomend calling their tech line for a size recomendation.
http://www.barrygrant.com/demon/default.aspx?page=21
#6
thats like there fuel pumps are like 15 volts
The holley 4779 would be a good one,or the new version of it, or the BG speed demon,just order the j tubes or order them from Gary Williams carburetors,mississippi,he also sell carbs.
The BG seems cheaper than the Holleys,last time i shoped them.
A 4 corner idle will be better
http://www.barrygrant.com/demon/default.aspx?page=5
http://www.jegs.com/i/Barry+Grant/13...010VE/10002/-1
http://www.summitracing.com/parts/HLY-0-4779C
droplegs, hp version
http://www.summitracing.com/parts/HL...1/?image=large
if your planing on moving up in power in the future, step up to 850+
The holley 4779 would be a good one,or the new version of it, or the BG speed demon,just order the j tubes or order them from Gary Williams carburetors,mississippi,he also sell carbs.
The BG seems cheaper than the Holleys,last time i shoped them.
A 4 corner idle will be better
http://www.barrygrant.com/demon/default.aspx?page=5
http://www.jegs.com/i/Barry+Grant/13...010VE/10002/-1
http://www.summitracing.com/parts/HLY-0-4779C
droplegs, hp version
http://www.summitracing.com/parts/HL...1/?image=large
if your planing on moving up in power in the future, step up to 850+