stainless braided hose???
 

just wondering where the best place is to buy 1" or 3/4" stainless braided hose/line? this is just for the front non high pressure x-over kit and exhaust to the gils. so just the generic anidized ends/clamps will be fine.

thanks for your help.
john

ps i am out of town at the moment and not near my boat. can't remember off hand what the majority size is that i need. either the 3/4" or 1". i know i'll need a piece of 1 1/4" as well. just looking to dress it up a bit.

thanks for your help.
john

any speed shop or summit/jegs

If its just for the cooling hoses and purely cosmetic, why not just get some bulk sleeving and slide it over your existing hoses?

http://www.sfxperformance.com/parts/MRG8092.htm


Personally I've moved away from the stainless braided, tired of it ripping the hair out of my legs and arms while working on the engine. I really like the new nylon braided stuff, looks great, high strength and w/o the hassle of stainless. Although nylon or stainless steel braided hose seems like overkill for cooling hoses but to each his own. :D

http://www.summitracing.com/parts/EAR-350316ERL/

I use 16an for intake to the crossover and 12an from the thermostat housing to manafolds.

Did all applicable hoses with stainless braided lines. What a difference it makes!