bravo shifts to easy
 

bravo 1 I was i out on my 35 ex got some air few times boat runs great I was pulling into the marina and the port drive shifts seems to easy into all postions i checked the drive fluid which is fine ,what could this be seems to easy.??????????????

ttt

Is it idling lower than usual?

Was it in advertently bound up before and "unbound" itself??

no to both questions

Maybe a long shot, but there is a ball and spring under the top rear cover that locates the linkage. May have a broken spring in there. The cover has 3 bolts and is sealed with an o-ring. It's easy to pull off, but you'll need to drain the drive.