whipple low profile intercoolers
 

I have BDS 8/71 blowers with BDS intakes, will the low profile intercoolers fit this combo, and how much height will it add. thanks

You will end up with new intakes and intercooler built in if you want low profile. Height depends on which cooler you run.

http://www.whipplesuperchargers.com/...sp?ProdID=1158

I believe the low profile innercooler adds about 1.75" in height.

Chris

If you run Whipples low profile cupronickel intercooler you will have to use their intake as well. The front is machined for the intercooler fittings to go through it. If you use the standard intercooler, you will only add 1" for the spacer and 1/8" for the intercooler flange. If you use the MOAC intercooler, you will need a 2" spacer plus the 1/8" flange.
Eddie

thanks for the info,do the whipple intercooler kits come with the intake or not, any idea on cost ? thanks again.Also do you think it I will gain muchfor power other than insurance for detonation.

TTT. any input would be helpfull,thanks

You will definately gain horsepower.

Chris

You will definately gain horsepower.

Give Dustin a call at Whipple.. He is the one who can best answer your questions. He is a little hard to get ahold of, but is an extremely helpful and nice guy.

Chris