Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   454 mag MPI revlimiter (https://www.offshoreonly.com/forums/general-q/217229-454-mag-mpi-revlimiter.html)

Topspeed25 09-21-2009 11:21 AM

454 mag MPI revlimiter
 
I'm newbie on performance boat, and I would like to know where is (RPM band) the revlimiter on 454 mag Mpi? and what happens when we got that?

Thanks for your input.

minxguy 09-21-2009 07:20 PM

I hit mine about 5100-5200.

Motor just goes flat.

Ken

Smitty 09-21-2009 07:57 PM

On thr fuel injected motors, it pulls fuel back as a way of limiting the rpm. As a result the engine is running leaner. If you run lean for too long you will burn up pistons. I found out the hard way.

Keep it off the limiter !!!!!

Topspeed25 09-21-2009 09:51 PM


Originally Posted by Smitty (Post 2957605)
On thr fuel injected motors, it pulls fuel back as a way of limiting the rpm. As a result the engine is running leaner. If you run lean for too long you will burn up pistons. I found out the hard way.

Keep it off the limiter !!!!!

How can I remove the rev limiter?

freshwaterfiend 09-22-2009 08:54 AM

Get a bigger prop and stay under the limiter. It's there for a reason.


All times are GMT -5. The time now is 02:17 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.