Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Pistons help (https://www.offshoreonly.com/forums/general-q/218000-pistons-help.html)

OhioRiverCigarett 10-04-2009 07:26 AM
Pistons help
 
I am going to have to replace some pistons. I am waiting on the machine shop to tell me is I have to bore the block. My question is how can a see the stock information on my GM pistons stamped #14097021? I am trying to make sure to get the right dome so that both motors are equal.

Thanks for the help in advance.

mike tkach 10-04-2009 07:37 AM
what size engine,what hp,and what year?:party-smiley-004:

FIXX 10-04-2009 01:45 PM
mrfixxall
 
Originally Posted by OhioRiverCigarett (Post 2965931)
I am going to have to replace some pistons. I am waiting on the machine shop to tell me is I have to bore the block. My question is how can a see the stock information on my GM pistons stamped #14097021? I am trying to make sure to get the right dome so that both motors are equal.

Thanks for the help in advance.
from experience,if you popped one engine then the other is not far behind doing the same thing..your best bet is to get them both redone,to me replacing pistons is like replacing spark plugs,do all or do none...

just my o2

Jeff P31 10-04-2009 05:04 PM
Unless the other motor is fairly fresh, I'm with mrfixxall


All times are GMT -5. The time now is 12:04 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.