steering helm size?
I have a single engine 24ft boat with a hp 500 bravo xr and ITS
I am currently using a 120 cc helm and the boat feels like it wants to make a u turn at the slightest turn of the wheel ( ok maby not that bad) Just wondering what other people are using? also I have only 2.5 turns lock to lock my concern is when running the boat in some rough water that if I get bounced around a little I don,t want the boat to turn unexpectedly thanks i |
2.5 turns lock to lock is a quite a bit. Thats what mine is on my AT and I think its too much. I would prefer 1.5-2. My Pantera was less than 1.5 turns lock to lock and it never felt like you describe yours does.
|
Helm Size
we sell the helm that you are using for a twin 28-32 application.
If you want a slower steer ratio use the next size smaller helm. A 211-1008 (95 cu in rev) |
I plan on slowing it down
just curious what other people were running or what was reccommended thank you |
its not the helm size I would take a look at the gimble pins and bushings
|
Fixx
That's the nature of the beast!! Those steering cylinders are so short they react fast, i think your on the rite track with the bigger helm..
|
All times are GMT -5. The time now is 11:37 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.