496 HO Engine Cowling
 

I'm considering an F&M Custom Cowling to improve the looks of my 496HO. http://www.customcowlings.com/ . Does anyone have any feedback or experience?

I have them on my 496's. They are starting to crack from the vibration. I also have CMI's so we had to raise them up for all the relocation stuff to fit under the covers. Would I do it again, probably not. However, they do look nice!

Interesting, where is the cracking occuring? Do you have pics of the issue?
F&M talks about robust construction

you can always paint them for a custom look

Great idea, looks sweet and is obviously cost effective. Any prep, brand of paint? etc.
From the pic looks like a spray gloss finish, temp resistant too?
Thanks!

friend of mine is a car painter,he used automotive paint base coat/clear coat had them done about a year ago,no problems

Did you tape off or reuse your decals or get new? Where did you get new if you went that way?

Thanks
.

BAM marine has them,about $20.00 for the 3 decals

I have the stainless steel f+m cowlings on my 31 sonic with twin 496 ho's for the last 3 yrs never had any problems still look like brand new!! also bought some of there other accessories for the 496 motors look great!!!

I did the same to mine using Krylon X-metals with the base coat and have had no issues. I taped the decals and outlined them with an exacto knife.

Paint them like these. They look good. The stainless ones are pretty stupid looking.