Offshoreonly.com - 454 Flywheel help.

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 454 Flywheel help. (https://www.offshoreonly.com/forums/general-q/223272-454-flywheel-help.html)

89 Baja 250

01-25-2010 08:54 PM

Quote:

Originally Posted by BillK (Post 3031561)

Mike,
Sorry I did not reply sooner, have been real busy :) I will look up that flywheel number in the morning at the shop and let you know if it is correct for your engine.

Thanks for your help. I will take a picture tomorrow of back side of flywheel. I only have picture of my block.
http://i24.photobucket.com/albums/c3...123001626a.jpg

89 Baja 250

01-26-2010 11:58 AM

That is a small block flywheel. Just found out from a guy down the street from me. I bought that on E bay. Guy said it was for a 454. Neighbor sold me a 454 flywheel for $90 bucks.Is for a Gen V and right bolt pattern. Thanks for your help.

89 Baja 250

01-27-2010 11:56 AM

Quote:

Originally Posted by BillK (Post 3031561)

Mike,
Sorry I did not reply sooner, have been real busy :) I will look up that flywheel number in the morning at the shop and let you know if it is correct for your engine.

Bill. Here is the number of the flywheel I got .3973457. Will it work?Also has # 6659825 written on it with marker. Guy at preformance boat shop said it will work with the 94 Gen V I have. What you think? Mike.

All times are GMT -5. The time now is 03:03 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page