KPM sea water pumps
 

has anyone tries these KPM 112 run dry seapump rebuild kit for merc., for $199.00 from West Coast Offshore.
If they work they sound great!!

Thks Joe

obviously they doen't work!!

dude,read the stainless sea pump thread in this section,it goes over many pumps and peoples comments.

I have been watching it, thanks but no one talks spec., about this one

I have not bought this kit, but I have 2 complete KMP run dry pumps that do not work. They have to be primed and then they put out next to no water pressure. I would steer clear of them.

I have them on 4 boats and have had ZERO issues with priming or water pressure.... dont figure.

I ran them on 2 engines and they would never prime on the hose. In the water they were fine. I took them off after one impeller cam apart, maybe a prime issue. I never lost a merc pump like that, so I run the mercs again with no issues.

Thanks for the input

Joe

I have run the KPM 112 for two years and it works flawless! Both in the water and on the hose.

me too..I even bought them from Trick Marine !!!:lolhit::drink: