|
wood teak
How hard is it to reteak a swim platform? boats a 85 an the woods gray would like to make it look like new again. whats a good way an or product to use;
|
carefull pressure wash, sand and teak oil
|
West Marine sells a cleaner (mild acid), followed by brightener (bleach). Then rinse with lots of water, allow to dry, and put on several coats of teak oil.
Badly blackened areas may need sanding. |
Just did
Just re-did mine... Used teak cleaner twice... Then followed up with a bleach water mix. Light sanding in some of the ruff areas.. Followed up with 3 coats of teak oil..
SWEEEEET.. Now if you want. you can skip the teak oil and use a good urethane for outdoor/wet use... like for front doors on a house. I have done that and it lasts for about 4 years...and looks great and no maint. The only problem is it will start to crack in about 3-4 years and then you will have to sand to re-finish.. Just looks better longer but more work at the tail end.. flip a coin...:lolhit: |
| All times are GMT -5. The time now is 04:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.