Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Bottom Surface Scrubbing off Speed? (https://www.offshoreonly.com/forums/general-q/229054-bottom-surface-scrubbing-off-speed.html)

low_psi 04-28-2010 08:34 PM

No scrapping was necessary. Took about 5 hrs. I used a hydrochloric based cleaned called Zing to disolve a majority of the barnacles, then followed up with a gallon of another hydrochloric based product called on-off (I believe that was suggested earlier in the thread). After a few applications with a garden sprayer and hitting with a 3500psi pressure washer w/turbo rotating tip, all of the barnacles were removed. There was some staining left that I am sure another cleaner will help, but I left it as is for now. It freed the boat up. Now at 3000 RPM the boat is cruising @ 40MPH, at 4000 RPM it was running well over 50MPH. I was able to break my previous mark of 62, by 3 mph and still had plenty of throttle left. I was running on fumes and the boat was getting real light at 65MPH and began to chine walk. So I will drop some fuel in it and see if a bit of weight will stop the chine walk. May change from the hydro 26p back to the Bravo I 26p, if adding weight doesn't get ride of the chine walk. I am sure I will see an increase in fuel efficency as well.

Here are a couple of better pics to give an idea of what I started with.
http://site.activesportsunglasses.co...ty/bottom2.jpg
http://site.activesportsunglasses.co...ty/bottom3.jpg


All times are GMT -5. The time now is 07:28 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.