Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   crossover hoses (https://www.offshoreonly.com/forums/general-q/230216-crossover-hoses.html)

rssteiny 05-10-2010 06:43 PM
crossover hoses
 
hp500 carb motors with stock gill exhaust, can i reuse the same hoses with a cross over as i did with stock circ pump or do i need to get different hoses and if so where and what are they. Thanks Rick

getrdunn 05-10-2010 08:48 PM
Originally Posted by rssteiny (Post 3107346)
hp500 carb motors with stock gill exhaust, can i reuse the same hoses with a cross over as i did with stock circ pump or do i need to get different hoses and if so where and what are they. Thanks Rick
Rick,
If you can use them without having to ad to them I would go ahead and use them. Does your Xover have the same size water outlets as the stock set up. Most of them do however I probably haven't seen them all either. I've reused mine on my CMI's and it seems like the Gils enter about the same place. How did you make out with your cam degreeing? Did you end up a A4?

rssteiny 05-11-2010 07:28 AM
Originally Posted by getrdunn (Post 3107484)
Rick,
If you can use them without having to ad to them I would go ahead and use them. Does your Xover have the same size water outlets as the stock set up. Most of them do however I probably haven't seen them all either. I've reused mine on my CMI's and it seems like the Gils enter about the same place. How did you make out with your cam degreeing? Did you end up a A4?
Yes we redegreed then to a4 and 107, hope it takes care of the reversion problem i had and makes a bit more power.


All times are GMT -5. The time now is 07:54 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.