push rods
im installing a set of prw roller rockers 1.5 3/8 self aligning stainless steel full roller rockers on my 350ho vortec motor should i replace the push rods or up grade them my motor has about 20hrs on it it has a edlebrock performer rpm intake holley 650carb msd ignition 8.5 wires 6alm box blaster 3 coil revolution marine alumioun exchaust 4inch wet motor was built by jason saris of performance marine
|
No reason to change them if they are perfectly straight and the ends are in good shape.
|
sounds good thanks for the input griff i appreciate it
|
All times are GMT -5. The time now is 07:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.