Oil Drain Kit
 

DOES ANYONE KNOW OF AN OIL DRAIN KIT THAT WILL SCREW INTO A STOCK MERC PAN 1/2X20 AND BE ABLE TO GO THROUGH MY DRAIN PLUG IN THE BOAT 1/2 INCH PIPE PLUG


THANKS FOR ANY HELP YOU MAY HAVE

When I had my motor out this winter I had one put on. It is very slow to drain due to the small ID of the hose. I'ts almost not worth it.

Sam

I am on my 3rd oil pump, There has to be a better way to get out ALL>>>> ALL the oil in that pan!:D :D

http://www.overton.com/cgi-bin/overt....cgi?spec+2C16


Best thing I ever did!
I usually drain after warming up on muffs, or just let it drain for awhile. It does go thru the drian plug.

Hey DQUICK, How you doing ? I am going south tomorrow to pick up my toy, hope to see you soon, Do a search for the titile of "oil plug to hose changeover???" Steve AKA Rampage covered this a couple of weeks ago, Later for now Dwight.:D :D

What do you do drill out your pan bottom and tap it ? where does the end of the hose go through the hull ?

It replaces your oil pan drain plug. You leave the hose attached and in the bottom of your engine compartment and just run it out thru your transom drain plugs when you want to drain your oil.

Oh, DuH ! So I guess I should find my drain plug today or tommorow. I'm was looking for a drain plug in my pan, but my back restricts me from bending over too much :D And My so-called friend told me there are no drain plugs in my pan. last time I buy him a beer that no good drunk! :p

Teague offers a kit for this.

HEY DWIGHT ARE YOU GOING TO JUST BRING IT DIRECTLY HOME
OR GO FOR A CRUISE. CALLED TEAGUE BUT THEY TOLD ME THAT IT WOULD NOT FIT THROUGH THE DRAIN PLUG. THINK I WILL CALL OVERTONS AND HAVE THEM MEASURE IT ,THANKS FOR THE HELP:D