Help me identify trim actuator
 

Can you give me a manufacturer name? I have looked everyware. I would like to switch to the one that mounts on the trim cylinder bushing rather than clamps on the the ram. Or is this custom?

Sorry here is the picture, (I hate it when that happens)

Hi Ray, that would be a Bluewater setup. He was the first. Made indicators since the 70's I think I have his (Bill rings a bell) number at the office.

Thanks Marc, I found them at: http://www.bluewaterperformance.com/
I will give them a call

Ray why do you want to change them? I have the same ones they are 14 years old and work fine.

B.R.S.

I wanted to get something that was more accurate and was concerned about hooking them up to the existing cable that is there. I was having problems with them not being conststant in their operation.After inspecting them ther is not much to them I think I will just clean them up and re-grease them and try agian. If they still bind I will have to inspect the cable.

P.S. We will have to get together for that drink soon, I have been so busy with missing all the work catching up and trying to fit in working on the boat it has been real hectic lately. How about Tuesday?

Ray I have never had any binding problems with mine. I have taken them apart and they do get a little gunked up but after cleaning them up with a little steel wool the work very smooth. I did not grease them and everything is OK. There is a small allen set screw you have to back off to get the cable out. Tuesday will work for me. What time?