Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   496mag repair (https://www.offshoreonly.com/forums/general-q/235307-496mag-repair.html)

how u du n 07-22-2010 04:20 PM

496mag repair
 
So we pulled the motor and found piston #6 broken and the rod bent pretty bad. Water enterd through the exhaust!!
this is what a local marine repair shop gave me as an estimate:
Remove engine and repower with a 8.1 Long Block

Remove existing engine and remove parts to be transfered to new long block
792.00

clean sealing surfaces of transferred parts and assemble on new long block(retail long block=8421.00)
1500 core charge-maybe refunded if core is ok
7200.00 long block
1584.00 labor

test run engine on the hard and ensure no leaks and proper operation
594.00

re-install engine in boat and lake test
990.00

total $13441.00

wtf are they thinking or am I just expecting too much of a better deal?

DRP 07-22-2010 05:17 PM

I'd look for a used one.
Who gave you the quote?

how u du n 07-22-2010 08:02 PM

Larsen Marine
waukegan Il.

SDFever 07-22-2010 09:09 PM


Originally Posted by how u du n (Post 3165695)
So we pulled the motor and found piston #6 broken and the rod bent pretty bad. Water enterd through the exhaust!!
this is what a local marine repair shop gave me as an estimate:
Remove engine and repower with a 8.1 Long Block

Remove existing engine and remove parts to be transfered to new long block
792.00

clean sealing surfaces of transferred parts and assemble on new long block(retail long block=8421.00)
1500 core charge-maybe refunded if core is ok
7200.00 long block
1584.00 labor

However, if you go with the wrong people you will be posting in the "beware" section by summer's end!!

test run engine on the hard and ensure no leaks and proper operation
594.00

re-install engine in boat and lake test
990.00

total $13441.00

wtf are they thinking or am I just expecting too much of a better deal?

You can do better ONLY if you are knowledgable and dilligent enough on your own. If that's the case, you can do way better but how hands on do you want to be in the deal?

Don't forget the shop is charging a premium for some type of warranty coverage etc... on and on and on....

Yes, 13,441 is the "yupie" price. That means backing the boat in the yard and forgetting about it until they call you.

I'd buy one of those 2,800 to 3,500 deals and just check it out real, real good. There was a really good deal in the classifieds recrently for 496's..

There are a couple here in sd for less than 4k fully dressed and running.

If you go with the wrong people, you'll be posting in the "beware" section by summer's end!!!

bajarick 07-23-2010 06:34 AM

I thought I seen 2 496 with 200 hrs on oso swap
thread for 8000.

DRP 07-23-2010 09:34 AM

Give Keith at water and wheels a call. If I'm right, you boat on the chain and Keith is right in Ingleside off of 59.

how u du n 07-27-2010 03:30 PM


Originally Posted by Bad-Influence (Post 3166180)
Give Keith at water and wheels a call. If I'm right, you boat on the chain and Keith is right in Ingleside off of 59.

Thats who I think will be dressing and dropping the motor back in. I found a guy to rebuild in Gurnee!!


All times are GMT -5. The time now is 06:00 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.