Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   stuck in gear (https://www.offshoreonly.com/forums/general-q/235527-stuck-gear.html)

Turbojack 07-27-2010 12:41 PM
Originally Posted by paul buckner (Post 3168786)
took the 2covers off ball and spring perfect still has greas on it everthing looks good and clean prop will not turn by hand either way but if i fire the motor prop spins i will have a go a taking drive of is it just the six nuts i can see and rams or is there a lot more going on in there that i cant see ???? regards paul from england
When you shift you should see the Shift shaft move. Are you?

Here is breakdown of what is there.

http://www.mercruiserparts.com/Show_...FXZ%2DDrive%29

paul buckner 07-27-2010 04:16 PM
Originally Posted by Turbojack (Post 3168945)
When you shift you should see the Shift shaft move. Are you?

Here is breakdown of what is there.

http://www.mercruiserparts.com/Show_...FXZ%2DDrive%29
when i try and shift onthe controls you can see movement on #14 and shift is allmost in the out of gear position not sure if the shift sharft is moveing but the small plates on the shaft move but it just wont go all the way thanks for taking the time to help regards paul from england


All times are GMT -5. The time now is 02:19 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.