Offshoreonly.com - Sea Strainer

Page 1 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Sea Strainer (https://www.offshoreonly.com/forums/general-q/236380-sea-strainer.html)

Keith Atlanta

08-07-2010 08:04 PM

Sea Strainer

Who makes a decent sea strainer that wont cost an excessive amount of money?

Rockfish71

08-07-2010 09:23 PM

http://teaguecustommarine.com//store...&cPath=836_839

Young Performance

08-07-2010 09:24 PM

They are all expensive. Hardin/CP Performance probably has the best prices for a quality piece. They have them from about $300 or so and up. They are all nice and are well built.
Eddie

fireboatpilot

08-07-2010 10:05 PM

I have a used KPM that will handle 2 engines, 6" round and 18" tall with a blue top. for $400. plus the ride.

thirdchildhood

08-07-2010 10:10 PM

http://i763.photobucket.com/albums/x...157Medium2.jpg

I went with the Teaque one too.

formula 382 sr-1

08-07-2010 10:12 PM

Quote:

Originally Posted by thirdchildhood (Post 3177254)

http://i763.photobucket.com/albums/x...157Medium2.jpg

I went with the Teaque one too.

+1:party-smiley-004:

Smitty

08-08-2010 08:08 PM

Get one from Teague. And spend the money for the wing nuts, it is easier to open by hand.

DareDevil

08-08-2010 08:30 PM

I SAY SM ( STAINLESS MARINE ) THEY ARE THE BEST !!!

Sorry Bob.

formula 382 sr-1

08-08-2010 09:18 PM

Quote:

Originally Posted by Smitty (Post 3177644)

Get one from Teague. And spend the money for the wing nuts, it is easier to open by hand.

You got that right !!!!! :lolhit:

thirdchildhood

08-08-2010 09:51 PM

Quote:

Originally Posted by Smitty (Post 3177644)

Get one from Teague. And spend the money for the wing nuts, it is easier to open by hand.

They are "wing bolts" that can't come out of the cover so can't be dropped. Yay!

All times are GMT -5. The time now is 03:33 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page