Offshoreonly.com - Need help with Exported Scanner file

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Need help with Exported Scanner file (https://www.offshoreonly.com/forums/general-q/236728-need-help-exported-scanner-file.html)

Fever575

08-12-2010 11:57 AM

Need help with Exported Scanner file

I asked the boat shop to scan my motor and send me the file via email. But i can't open it. Can anyone out there open it for me and export it to something i can read?
i will try to post it but if that does not work i can email it. Please and thank you!
GM-DELCO MEFI 3 07 29 2010 20 22 48.rec

SDFever

08-12-2010 03:45 PM

2 Attachment(s)

This is a quick and dirty report. You need the software to watch the run time file but hopefully this might help you???

SDFever

08-12-2010 03:49 PM

I was about 12 rpm's off on my first note but it moves so fast it's hard to catch it perfect without changing the scale etc..

12 is so negligible that it couldn't possibly matter anyway. Cheers!

Fever575

08-13-2010 10:54 AM

thank you very much!

SDFever

08-13-2010 10:59 AM

Quote:

Originally Posted by Fever575 (Post 3181888)

thank you very much!

No worries! Don't forget that this is a "static" set of numbers. The spark advance will vary greatly depending on rpm, loads, etc....

This snap-shot was captured at 1536 rpm.

Fever575

08-14-2010 11:46 AM

thanks for the input

All times are GMT -5. The time now is 02:28 PM.