Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - code 44 (https://www.offshoreonly.com/forums/general-q/238505-code-44-a.html)

larry da outlaw

09-06-2010 06:31 PM

code 44

have a code 44 (knock sensor) on a 2000 350 mpi. any ideas

FIXX	09-06-2010 09:55 PM

fixx

Quote:

Originally Posted by larry da outlaw (Post 3200954)

have a code 44 (knock sensor) on a 2000 350 mpi. any ideas

its in on of the water plugs in the block,,take it out wire wheel it and clean the block and put it back in..it snot grounded properly and that will set the code..

larry da outlaw

09-07-2010 05:43 PM

funny u said that. I had noticed some corrosion around my sensor block. the rest of the engine is clean enough to eat on.
will be sanding and painting the block this weeknd. also doesthe sensor share the same block with a drain?

FIXX	09-07-2010 06:52 PM

Fixx

Quote:

Originally Posted by larry da outlaw (Post 3201799)

yes it does, look closly,,it may have salt water in it but not likely.

larry da outlaw

09-11-2010 02:51 PM

yep that what is was, sea ray running great now

All times are GMT -5. The time now is 08:45 AM.