Thermostat Housing
I want to put the circulating pumps back on my engines and was wondering what t - stat housings will work the best? Are the stock Merc ones still available? BBC with Gil exhaust.
Thanks |
fixx
if you only have 2 hoses going to the manifolds and none going to the riser then this woul be the one i would use and have used..
http://www.georgiawatersports.com/Pr...dcategory=2235 |
What should the water pressure be at idle? My gauge is plumbed into the top of the intake not sure if that matters
|
Fixx
Originally Posted by eightsecmopar
(Post 3225219)
What should the water pressure be at idle? My gauge is plumbed into the top of the intake not sure if that matters
|
Idle water psi is 0-5# on pretty much all boats. Idle water psi really doesn't matter.
Its the max psi you see at WOT that is important. 20-25psi is ideal for WOT. |
If you want the above style thermostat housing, but in a stock merc version, I have an extra one laying around that is in really nice shape. It's not all chrome and shiny, but it's not corroded or anything.
- Will |
All times are GMT -5. The time now is 11:42 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.