Offshoreonly.com - Gimbal replacement, XR, HP or IMCO?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Gimbal replacement, XR, HP or IMCO? (https://www.offshoreonly.com/forums/general-q/240658-gimbal-replacement-xr-hp-imco.html)

2Slow4me

10-12-2010 12:11 PM

Gimbal replacement, XR, HP or IMCO?

My gimbal and ring are destroyed, now I have to replace. Would like to improve the safety factor, but also don't want to go over kill.

XR, HP or IMCO?? (what is the difference?)

Stainless gimble ring?

What type of full Hydraulic steering?

Currently the 21' boat will do 81 MPH on GPS, the hull is V bottom with pad. Would assume with a fresh motor, would get in the high 80's. So using a maximum speed of 90 MPH.

What should I do?

DiamondPerformance

10-12-2010 12:37 PM

If you want the IMCO Gimbal you will have to have a full hydraulic steering system.

FIXX	10-12-2010 03:18 PM

Fixx

in your case http://watertown.craigslist.org/boa/1966024392.html

get the conversion standoff box and trans from arneson and go 90mph:drink:

cobrapower

10-12-2010 03:23 PM

we have it

hi we do have your gimbal call me at 305-893-5018 Alex

smiklos@sunprint

10-12-2010 03:59 PM

Quote:

Originally Posted by cobrapower (Post 3228844)

hi we do have your gimbal call me at 305-893-5018 Alex

The IMCO unit is very refined appears to be a good upgrade over the hp.
Steve

All times are GMT -5. The time now is 06:33 PM.