Exhaust Tips
 

What are the best brand of 4in angle cut tips, with flappers built in, to buy. Thanks for the help. Eric

Corsa. Good warranty and will repair them for a reasonable fee if needed. I sent a 10 year old tip back for a flapper replacement and it came back looking new for around $60.

Choice is up to you!
 

Well if you want the best we carry Hardin Marine

Made from high quality 316L Stainless Steel (not cheaper 304) with "Silent Seal" easy replacement internal flapper (don't have to remove tip from boat to replace).

On Sale for $79.99 each

http://www.cpperformance.com/p-12591...haust-tip.aspx

Marine Performance Media Informational Video
http://www.youtube.com/watch?v=xvBg_...layer_embedded

tips
 

I just went through all of this and did a lot of research. My tips are being custom made due to a funky angle on the mounting flange and I also didn't want them to stick out to far off the back of my boat so I came up with my own lengths, found out exactly what the degree the flange needed to be, etc... and faxed the info to stainless marine. Personally, I decided to go with stainless marine because everything I have seen from them is very nice quality. My tips (custom made) are $175.00ea but it's worth the cost knowing that they will be exactly what I want. I know that if you bought an off the shelf tip from them they would be cheaper. I looked into Corsa (off the shelf tips) and was very happy with the quality but the price was a little steep to me. Just my 2 cents.....hope it helps.