Comp Roller Cam identification help....
 

Not sure if there is anything that can be done to identify a cam i have but input is welcome.

i have a comp hydraulic roller custion grind that I ran in a 540 on the dyno only. It made over 600hp and was a pretty mild build. I was happy with that but then some other options came up.

So this was removed and has been on my shelf in a box for 3 yrs. I lost the card for it. Can you measure it somehow or look it up somewhere?

There should be numbers on one of the ends, call Comp Cams they should be able to help you out.