|
My set-up is a Crane valve train and with your comments, it is
making me a bit concerned with the new cam. I have been running a hyd roller for the last 200hrs without the noise. I am running the guide plates on stock 7.4 big block. The new set-up added a Procharger, Edelbrock Alum. heads and a bigger cam. I am staying with the Crane roller set-up and will be firing it up in a week or so.... I'll let you know how it turns out... As a side note: I know everyone is the expert about valve lash (except me), so Crane said to use a one turn addition at zero lash. This helped me in the past to keep them quiet. Is that what everyone else is using???? |
Originally posted by red racer My set-up is a Crane valve train and with your comments, it is making me a bit concerned with the new cam. I have been running a hyd roller for the last 200hrs without the noise. I am running the guide plates on stock 7.4 big block. The new set-up added a Procharger, Edelbrock Alum. heads and a bigger cam. I am staying with the Crane roller set-up and will be firing it up in a week or so.... I'll let you know how it turns out... As a side note: I know everyone is the expert about valve lash (except me), so Crane said to use a one turn addition at zero lash. This helped me in the past to keep them quiet. Is that what everyone else is using???? "Bad-Habit" |
| All times are GMT -5. The time now is 09:41 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.