Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Water pressure with crossovers/t-stat (https://www.offshoreonly.com/forums/general-q/24734-water-pressure-crossovers-t-stat.html)

MIKEHTMSR24 05-22-2002 06:04 PM


Originally posted by jdnca1
Mike;

Your point is well taken about low end pressure...it was a concern of mine as well. At idle I have about 4-5 psi, with barely a trickle coming out the dump, at 70 mph pressure is about 15 with a good stream out the dump, and at 100+ pressure is 20. I do know from before I had the dump my idle pressure was exacly the same as now, at 70 I had about 25 psi, and @100+ the guage was buried (I estimate 45psi+) :eek: My water temp is 150 all the time, idle..6700rpm, doesn't matter. I run a thermostat in the system as well.

That sounds dialed in to me. I don't have an accurate water pressure gauge on the dash. The one on the intake is though. I'll have to see if mine stays at 18 all the time. I have looked at it at 70 but not high 80's. All of my water dump fittings have a 1" ID.
How is your oil temps. This is something I may have to work on this summer. Will probably need a oil stat.


All times are GMT -5. The time now is 10:36 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.