My Winter Project Is Done
 

I got it done today I will go to the dyno in a couple weeks will let you know what we get out of it.
It is a 601 cu inch solid roller cam by RM Builder With a M4 blower

Looks great dennis! That carb liked about 10lbs base pressure. Can't wait to see what she makes on the dyno. :drink:

What are the cam specs if you dont mind?

cool, serious H/P there !!!

Is that going into your SR 24?. Im guessing easy 1000 hp on pump fuel. Should put you in the 120s if you dare.

Wow, very nice. That M4 is huge. Can't wait to see your dyno numbers. You trying to make that HTM fly?

Yes it is going into my HTM and we are hoping for 1200 or 1300 hp.

**

1200 HP = bmax kaboom!!!

Maybe rob how is your project going and what can you tell me about a B-Max.

My motors should be back in about 3 weeks making about 600 HP a piece. So two of mine equal one of yours:) I do not have any personal experience with the bmax, but have heard the upper is almost bulletproof, but the lower is probably not going to enjoy that kind of torque. Wonder how a number 6 would look hanging of the back?

I thought you were building blower motors for your boat.lower gears we be ate up in about 50 hours

Yes almost put a set of 8-71 Blowers on those engines, but I new those trs drives would not last long. So I practiced some patience and decided to address the drive situation, before I supercharge.

I am sure RMBuilder minds. What not trying to email Bob and have a chat with him. You will find him nothing but professional. Next time, trust you do the same.

I have emailed Bob about my own project a year ago. Obviously the OP didnt post them, so why was it necessary for you to chime in?:kiss:

I didnt realize it was unprofessional to ask for cam specs.:lolhit: I was just curious.:angry-smiley-038: Besides, it isnt like cam specs are some big secret.

that M4 is friggin HUGE !