Offshoreonly.com - Cam limit before reversion occurs

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Cam limit before reversion occurs (https://www.offshoreonly.com/forums/general-q/250350-cam-limit-before-reversion-occurs.html)

87MagnumII

03-29-2011 05:56 PM

Cam limit before reversion occurs

What is the Roller cam limit for a sbc with stock merc exhaust before reversion issues occur?

f_inscreenname

03-29-2011 09:24 PM

Quote:

Originally Posted by 87MagnumII (Post 3363028)

What is the Roller cam limit for a sbc with stock merc exhaust before reversion issues occur?

Lobe separation is the key.

87MagnumII

03-29-2011 10:14 PM

Quote:

Originally Posted by f_inscreenname (Post 3363271)

Lobe separation is the key.

is 112* acceptable?

FIXX	03-29-2011 11:35 PM

Fixx

Quote:

Originally Posted by 87MagnumII (Post 3363330)

is 112* acceptable?

yes it is,,you can advance it too 2*,will give you more bottom end and for sure it wont inhale water..

Griff

03-30-2011 02:03 AM

With the cast Merc exhaust manifolds and short risers, I would not go with less than a 114 LSA.

All times are GMT -5. The time now is 05:01 AM.