Latham rams on imco extension box arms?
 

Guys I'm looking into getting imco neutral boxes with the steering arms mounted on them. The problem is that I have Latham steering rams and imco says they will not fit their steering arms. Is there anything out there that can adapt these? I can't see why it wouldn't fit? Is it the swing length of the ram itself or the mounting holes? Any help is appreciated.

Nothing? No answers from any of you extension box gurus?

Yes it can be done. I made it work for a irishtornado on here. You just have to change the clevis that attaches the cylinders to the box. As long as the distance between the transome mount and the drive cap are the same as the box and the drive cap. Hope this helps.