Bolt removal - bellhousing to transom
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Bolt removal - bellhousing to transom
I see from old threads these things have a tendency to rust/corrode to a sleeve in the transom plate. So if I can't break these loose, and confirm I haven't broken anything where the nut is captured underneath, then that's what I'm facing? So Plan B would be trying to separate the bellhousing from the block?
Volvo uses studs in this application, I think I'd put it back together that way, if there's room.
Volvo uses studs in this application, I think I'd put it back together that way, if there's room.