Trailer Brake Issue
I have a Heritage, (Piece of Crap IMO), tri-axle trailer with disc brakes on all six wheels. Yesterday after coming off the lake and trailering about 4 miles back to my storage garage, I noticed a smell coming from the trailer. I went back to one side of the trailer and the wheel(s) were very hot, but not smoking. My question is, what is the easiest way to separate a master cylinder problem from an individual caliper problem?
Any suggestions would be greatly appreciated. |
Originally Posted by Bad Bird
(Post 3416802)
I have a Heritage, (Piece of Crap IMO), tri-axle trailer with disc brakes on all six wheels. Yesterday after coming off the lake and trailering about 4 miles back to my storage garage, I noticed a smell coming from the trailer. I went back to one side of the trailer and the wheel(s) were very hot, but not smoking. My question is, what is the easiest way to separate a master cylinder problem from an individual caliper problem?
Any suggestions would be greatly appreciated. |
drive for a bit and feel for the hot hub..
|
If more than 1 wheel is hot, then look at the master cyl/ coupler. If just 1 wheel, then look at that wheel.
|
All times are GMT -5. The time now is 12:40 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.