Offshoreonly.com - Crankcase Pressure

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Crankcase Pressure (https://www.offshoreonly.com/forums/general-q/255872-crankcase-pressure.html)

Budman II

06-30-2011 10:10 AM

Quote:

Originally Posted by ckin62 (Post 3442286)

I tried a different pressure sender and it gave me the same read pattern. I also have 2 other pressure switches (one for a dash light and the other an alarm). When I was test test running they never indicated an issue, but in the driveway at idle they do. So, I don't think it is an easy fix.

You need to throw a mechanical gauge on it - the electrical gauge might have an issue. But it is suspect that it is suddenly reading low.

ckin62

07-01-2011 08:12 AM

Oil filter full of bearing material. Pulling to down tomorrow.

blue thunder

07-01-2011 10:08 AM

Major bummer but at least now you know. A word to the wise, replace all rubber oil lines and oil cooler. Look closely at the piston skirt also for bearing material. It gets in the skirts and wrecks them.

All times are GMT -5. The time now is 03:45 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page