setting cam endplay with cloyes 2 piece timing cover
#1
Registered
Thread Starter
Join Date: May 2009
Location: Kelowna BC canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
setting cam endplay with cloyes 2 piece timing cover
Hey guys i have a 2 piece cloyes timing chain cover and i was wondering if anybody out there knows the correct method of setting the endplay with this cover?
#2
Platinum Member
Platinum Member
iTrader: (1)
I'm pretty sure my 2 piece cover is a cloyes, I used a roller thrust bearing (on the front of timing gear), I put shims under the roller button base ubtil I had a few thous play, Smitty