Offshoreonly.com - Urgent help on jet size

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Urgent help on jet size (https://www.offshoreonly.com/forums/general-q/26022-urgent-help-jet-size.html)

jr	06-06-2002 05:33 PM

Urgent help on jet size

1 Attachment(s)

Can anyone tell me what size this jet is. You are looking top down on the even (starboard) side of the carb jet. Its stamped either 89 or 68. I measured the oraface on the jet. The hole inside the bowl is about .068 but the hole into the carb is around .089. I just had to be that number. Thanks guys. I'm trying to get the boat in the water this weekend. Its running rich so I pulled and replaced the power valve and I've always thought the carbs may be jetted alittle rich.

Thanks for the help.

Smitty

06-06-2002 05:40 PM

That is a 68 jet.

In this case the smaller circle of the eight marks the TOP of the number.

Dave

jr	06-06-2002 06:29 PM

Thanks Dave.

All times are GMT -5. The time now is 07:23 AM.