Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Best prop for top speed (https://www.offshoreonly.com/forums/general-q/261803-best-prop-top-speed.html)

Colbaltmania 09-06-2011 07:28 PM

Best prop for top speed
 
I have a 99 25ft Colbalt with 454 mag mpi. I currently have a bravo 3 with 28 pitch prop. My maxed RPM is 4800 at 56mph. Would I be better off with a 24 or 26 prop to reach a higher rpm and speed?

jeffswav 09-06-2011 09:33 PM

If you are woried about top speed swap out the Bravo 3 for a Bravo 1 lower. Or just leave it alone

puzzleboy 09-12-2011 08:57 AM

I run 28p on my Bravo 3 driven Baja 272. I've seen 61mph (GPS), bone stock engine. Not sure of the RPM though. I have another set of 26s, and not a huge difference.

Don't change your B3, one of the best drives out there for a boat like that.

Knot 4 Me 09-12-2011 09:13 AM

You should be turning 5K RPM at WOT with a 454 MAG MPI. You can have Brett at BBlades work those 28's to gain more RPM and top speed.

Dave M 09-12-2011 10:04 AM


Originally Posted by Knot 4 Me (Post 3501447)
You should be turning 5K RPM at WOT with a 454 MAG MPI.

+1

dbkski 09-13-2011 01:14 AM

According to my Cobalt manual you should be using a 26P propset for
your Bravo 3 with a 454 Mag MPI. The 502 Mag MPI used the 28P
propsets. This is for the 252/253/25LS models. Which do you have?

Also you really need to get an accurate tachometer, digital is best,
before you do any more "testing" or make any changes. I went
through this myself and found significant speed increases with the
last 250 RPM's.

Colbaltmania 09-13-2011 06:18 AM

I know the bravo 3 is faster than the bravo one up to 63 mph so I don't think my boat will be breaking this speed with my current stock 454 mag mpi. Im just trying to get close to the max speed performance of my outdrive.



Originally Posted by jeffswav (Post 3497344)
If you are woried about top speed swap out the Bravo 3 for a Bravo 1 lower. Or just leave it alone


Colbaltmania 09-13-2011 06:27 AM

Yes BBlades is on my list. Also I thought that I had 28 props on my drive. It turns out they are 24. Must have been having one of those days when I checked em out. :drink:

I noticed on the rear prop, on the outer rim has a flat spot and is not totally round. I would guess this is whats causing my vibration when my boat has a load of people full cooler and tank of gass.


Originally Posted by Knot 4 Me (Post 3501447)
You should be turning 5K RPM at WOT with a 454 MAG MPI. You can have Brett at BBlades work those 28's to gain more RPM and top speed.


Colbaltmania 09-13-2011 06:28 AM

I have 24 props.


Originally Posted by dbkski (Post 3502119)
According to my Cobalt manual you should be using a 26P propset for
your Bravo 3 with a 454 Mag MPI. The 502 Mag MPI used the 28P
propsets. This is for the 252/253/25LS models. Which do you have?

Also you really need to get an accurate tachometer, digital is best,
before you do any more "testing" or make any changes. I went
through this myself and found significant speed increases with the
last 250 RPM's.



All times are GMT -5. The time now is 01:46 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.