Offshoreonly.com - 1 piece crank in a 2 piece block

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 1 piece crank in a 2 piece block (https://www.offshoreonly.com/forums/general-q/264083-1-piece-crank-2-piece-block.html)

ckin62

10-14-2011 08:12 PM

1 piece crank in a 2 piece block

Looking for a block to replace my cracked gen 6. Found a great deal on a Merlin III. However, it is a 2 piece RMS block. Can a 1 piece crank work in a 2 piece RMS block? I know there are adapters for the reverse set up.

picklenjim

10-15-2011 12:20 AM

No.

catman01

10-16-2011 09:18 AM

Never seen anything for doing this so I would agree with previous post. Good luck with your project

offthefront

10-16-2011 03:11 PM

If you dont need the Merlin Block I know someone looking for a MIV block .....mike

[email protected]

ezstriper

10-16-2011 06:51 PM

I have a 454 4 bolt main Gen IV bare block, not rusted, std bore..$650...

All times are GMT -5. The time now is 09:51 AM.