|
starboard 509 is trashed.
I broke a roller off a lifter on # 3 cylinder and its amazing the damage parts and pieces can do floating around inside a block.
I'm looking for a good 502 block to bore .030 and try to maintain the same power with the same componets as the port side. The machine shop checked the crank and the camshaft and they looked fine. I tore it down myself so looking at it first hand and not even seeing a scratch or ding was good but everything else is pretty much junk. If anyone has a really good 502 that hasn't been worked on, let me know! Thanks for looking. |
Originally Posted by David Ray
(Post 3537993)
I broke a roller off a lifter on # 3 cylinder and its amazing the damage parts and pieces can do floating around inside a block.
I'm looking for a good 502 block to bore .030 and try to maintain the same power with the same componets as the port side. The machine shop checked the crank and the camshaft and they looked fine. I tore it down myself so looking at it first hand and not even seeing a scratch or ding was good but everything else is pretty much junk. If anyone has a really good 502 that hasn't been worked on, let me know! Thanks for looking. need pics and better check that Camshaft real good ,who's lifter ???? Cr@Wer :evilb: |
Originally Posted by fountainfan42
(Post 3538128)
OUCH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!:eek:
need pics and better check that Camshaft real good ,who's lifter ???? Cr@Wer :evilb: |
What is wrong with the block besides the cylinder?
|
Block has already been bored .030 and chunks of bottom cylinder wall missing on #5 and #7. Any good suggestions! I'm all in!
|
| All times are GMT -5. The time now is 11:01 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.