Water Flow Through Cmi E-top Headers
Looking to see if CMI E-top headers can handle discharging water from an Eickert 2-stage water pump. Custom Marine says they can handle that much volume with little back pressure. 2-stage pump feeds engine on front stage and coolers on the inner stage.
|
Run the engine hose to the bottom of the header and the chiller hose to the top of the header. I don't think there should be any issues.
|
Originally Posted by Griff
(Post 3541627)
Run the engine hose to the bottom of the header and the chiller hose to the top of the header. I don't think there should be any issues.
|
Originally Posted by Griff
(Post 3541627)
Run the engine hose to the bottom of the header and the chiller hose to the top of the header. I don't think there should be any issues.
|
All times are GMT -5. The time now is 07:47 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.