|
Originally Posted by mrfixxall
(Post 3545564)
i use a bilage pump..has not failed me in over 20 yrs :drink:
i also turn up the idle to 1200 rpms.while its running at the end of the i will for the engine.. http://www.youtube.com/watch?v=LzDob8um5Xc |
Just to finish this thread,
I did get the seawater pump installed, cleaned out the hoses and ran antifreeze thru everything. All is well, thanx for the input. |
You might want to get a spare impeller to keep on hand. I keep a spare impeller as well as a complete sea pump on the boat. You will need it sooner or later. Like mentioned above, they will go out without notice and if your prepared it's only 30 minutes to an hour and your back in business. Just saved my buddy as I had a spare. Now he too carries extra's
|
Originally Posted by Revd Up
(Post 3552743)
You might want to get a spare impeller to keep on hand. I keep a spare impeller as well as a complete sea pump on the boat. You will need it sooner or later. Like mentioned above, they will go out without notice and if your prepared it's only 30 minutes to an hour and your back in business. Just saved my buddy as I had a spare. Now he too carries extra's
|
| All times are GMT -5. The time now is 06:16 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.