Offshoreonly.com - Rod and main bearing choice

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Rod and main bearing choice (https://www.offshoreonly.com/forums/general-q/267706-rod-main-bearing-choice.html)

supermx96

01-03-2012 11:18 PM

Quote:

Originally Posted by blue thunder (Post 3584333)

You won't have any trouble with h clevites, that is just a theory of mine. I been using them for a number of years and never have oil pressure issues. I do run a good oil pump though in the 10778c melling.

For an oil pump with a hi flow and a hi pressure does it is recomended to have more that 8 qt oil pan?

Thanks

blue thunder

01-04-2012 07:10 AM

My pans hold 8 qts. It takes about 10qts to fill when the engine is new but oil changes are 8qts. I never had an issue with sucking air and don't think I am even close.

checkeredpast

01-04-2012 08:40 PM

I have always used Clevite bearings, i see a lot of people are selling King brand bearings. Has anyone used the King's,good or bad?

All times are GMT -5. The time now is 05:19 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page