Offshoreonly.com - template for IMCO dual ram steering

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - template for IMCO dual ram steering (https://www.offshoreonly.com/forums/general-q/268044-template-imco-dual-ram-steering.html)

2tonchevy

01-01-2012 12:06 PM

template for IMCO dual ram steering

im installing a used IMCO twin ram full hydraulic steering system on my buddies cat.

i need a template and instructions for where to drill the holes in the transom.

anybody ????

thanks!!

blownhammer2000

01-01-2012 09:05 PM

call ron at imco, i'm sure he will help you out

jwurl

01-01-2012 09:16 PM

There is no template with their steering kits. All the dimensions are in the catalog . There is a drawing on the page that your steering kit is on. Measure the rams at the center of mounting holes then figure out which kit you have. Also pay attention to the style of hose connection you have on the transom. I am sure the complete catalog is on their website. Very easy to lay out the holes with the correct picture. Jeff Wurl

bajabob

01-02-2012 08:17 AM

I Use The Inside Plate. The Work For Me Very Easy.

All times are GMT -5. The time now is 11:46 PM.