Offshoreonly.com - any reversion problems with eddie marine with stainless risors

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - any reversion problems with eddie marine with stainless risors (https://www.offshoreonly.com/forums/general-q/268224-any-reversion-problems-eddie-marine-stainless-risors.html)

hjalmerroe

01-04-2012 04:50 PM

any reversion problems with eddie marine with stainless risors

motors are 454 .30 over srp mini dome pistons 9-1 compression with 118cc merlin lg oval port heads crane 134242# .50 duration 226int236exh rpm air gap intakes and 500hp carbs. was wondering if i would have any water reversion with eddie marine manifolds and stainless risors they call it there 511 kit for bravo

Rockfish71

01-04-2012 05:01 PM

You will be fine with them they are a nice system .

Sledge Hammer

01-04-2012 06:15 PM

Quote:

Originally Posted by Rockfish71 (Post 3585582)

You will be fine with them they are a nice system .

+1 here. I had pretty much the same combination on a prior engine with no problems. I even had Captain Call.

All times are GMT -5. The time now is 01:05 PM.