Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   496 Procharger 3.5psi (https://www.offshoreonly.com/forums/general-q/269152-496-procharger-3-5psi.html)

GRH 01-24-2012 08:12 AM

I ran a 3.5 psi ProCharger for 4 years & 200 hours on a 496 Mag.... no ECU reprogram.... NO PROBLEMS EVER! And the motor is still running perfect for the new owner today last I heard....boat went from turning a 24 Bravo one at 4900 rpms to turning a 28 Bravo one at 4900 rpms... nothing changed in the mannerism of the 496 under 4000 rpm's... once into the boost, over 4000 rpms... everything changed... including the gas mileage!

I wouldn;t hesitate a minute to procharge a 496Mag 3.5 psi.... remember Mercury used to warantee their 525SC for one year back in the 90's with only 3 lbs of boost.... 3lbs won't hurt a thing on that motor.....

Bustinan1022 01-24-2012 09:49 AM

My 496 was rebuilt to be ran with the PC. All forged internals, balanced and blueprinted. SS and inconel valves, upgraded springs, blower cam, bigger injectors, PCM programmed in boat while under way. It now makes totally reliable power and I am not worried about calling on it. Also still get good fuel milage at cruise. My 34 prop will push up to a best of 102 MPH and that is only at 4.5 lbs of boost. I could go a bit more boost if I wanted, but I'm happy with it being totally reliable. Downside is that it cost a lot of $$$$$ to totally rebuild the motor to these specs.

JB

Bustinan1022 01-24-2012 09:52 AM


Originally Posted by GRH (Post 3600367)
I ran a 3.5 psi ProCharger for 4 years & 200 hours on a 496 Mag.... no ECU reprogram.... NO PROBLEMS EVER! And the motor is still running perfect for the new owner today last I heard....boat went from turning a 24 Bravo one at 4900 rpms to turning a 28 Bravo one at 4900 rpms... nothing changed in the mannerism of the 496 under 4000 rpm's... once into the boost, over 4000 rpms... everything changed... including the gas mileage!

I wouldn;t hesitate a minute to procharge a 496Mag 3.5 psi.... remember Mercury used to warantee their 525SC for one year back in the 90's with only 3 lbs of boost.... 3lbs won't hurt a thing on that motor.....

I wouldn't boost anything without forged pistons. Just my opinion though.

checkeredpast 01-24-2012 04:42 PM


Originally Posted by GRH (Post 3600367)
I ran a 3.5 psi ProCharger for 4 years & 200 hours on a 496 Mag.... no ECU reprogram.... NO PROBLEMS EVER! And the motor is still running perfect for the new owner today last I heard....boat went from turning a 24 Bravo one at 4900 rpms to turning a 28 Bravo one at 4900 rpms... nothing changed in the mannerism of the 496 under 4000 rpm's... once into the boost, over 4000 rpms... everything changed... including the gas mileage!

I wouldn;t hesitate a minute to procharge a 496Mag 3.5 psi.... remember Mercury used to warantee their 525SC for one year back in the 90's with only 3 lbs of boost.... 3lbs won't hurt a thing on that motor.....

I totally agree!

pqjack 01-24-2012 05:15 PM

i read somewhere that you get approx. 25hp for every pound of boost...3 pounds on an ho would get you around 500hp...not too bad,i guess

checkeredpast 01-24-2012 06:46 PM


Originally Posted by pqjack (Post 3600709)
i read somewhere that you get approx. 25hp for every pound of boost...3 pounds on an ho would get you around 500hp...not too bad,i guess

3.5 gets 580hp on a ho. The25 hp per pound of boost is after the first 3. the 5 psi kit makes 625.

Raylar 01-24-2012 11:52 PM

For those who are lucky enough to run stock block mercury 496's with superchargers even those at 3.5 lbs of boost, no ECM reprogramming and have no issues from the engine you have joined the lucky 10% club and all the best to you. If you don't care for 10/90 odds then I would beef up the rotating assembly before you go there.
Just my professional opinion, but what the heck do I know ?

Best Regards,
Ray @ Raylar

GRH 01-25-2012 07:28 AM


Originally Posted by Raylar (Post 3600955)
For those who are lucky enough to run stock block mercury 496's with superchargers even those at 3.5 lbs of boost, no ECM reprogramming and have no issues from the engine you have joined the lucky 10% club and all the best to you. If you don't care for 10/90 odds then I would beef up the rotating assembly before you go there.
Just my professional opinion, but what the heck do I know ?

Best Regards,
Ray @ Raylar

I don't believe the 1 in 10 odds...... but I'm sure you see the ones that don't work out... and never hear from the ones that do....

pqjack 01-25-2012 09:55 AM


Originally Posted by GRH (Post 3601069)
I don't believe the 1 in 10 odds...... but I'm sure you see the ones that don't work out... and never hear from the ones that do....

so true,and same here...i only see the exploded harleys...

pqjack 01-25-2012 09:56 AM


Originally Posted by checkeredpast (Post 3600771)
3.5 gets 580hp on a ho. The25 hp per pound of boost is after the first 3. the 5 psi kit makes 625.

thanks...you just gave me 50 hp i didnt know i had !!


All times are GMT -5. The time now is 08:11 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.