Offshoreonly.com - 496 exhaust on a 502 mpi

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 496 exhaust on a 502 mpi (https://www.offshoreonly.com/forums/general-q/269188-496-exhaust-502-mpi.html)

sledfreak

08-02-2018 09:07 AM

I just picked up a set of Aluminium 496HO Manifolds (single Inlet) and SS risers. They are off a 2004. I have a 99 stock 502 in a 272 baja (OEM). I have the ecm, shift & oil brackets from the 496HO. Will those brackets all bolt up or do I need to buy specific ones. Thanks.. https://cimg4.ibsrv.net/gimg/www.off...488d6fa6ff.jpg

Carrera J

08-06-2018 09:48 PM

Sled freak, what are the part #’s of the manifolds you just picked up? I’m trying to do the same on a GEN V 454Mag. I don’t have any brackets yet. Also, trying to find out what I will need for the conversion.

All times are GMT -5. The time now is 06:11 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page